CCTV Tester Pro Manual de usuario descargar pdf (Pagina 16)

CCTV tester PRO User’s Manual

Page.15.

Call preset-98

—

Run frame Scan

Call preset-99

—

Run Auto scan

PTZ continuing rotate test

PTZ continuing rotate test is used to test whether the “PTZ rotate” is normal. Press and hold the

direction key (e.g. or ). The PTZ start rotating. Press the "power" key one time, then

release the direction key. PTZ will rotate continuously. Press any direction key afterwards will stop

the rotating.This function is used to test whether the “PTZ rotate” is normal. The PTZ may have

problem when rotates to some particular position,like not rotating smoothly or get stuck. The

install worker could judge whether the PTZ has problem by observing the PTZ .

3.4. Video Setting

User can customize the brightness, contrast and saturation of the LCD according to the using

environment , the CCTV tester auto display the format(PAL/NTSC) of video input, and analysis

the input video signal level.

a. Press the or key to select the parameter which we want to change the value.

b. Press the or key to change the value. Press ENTER key to save the change

or press RETUR key to give up the change

c. The Video Format and Video Level will be displayed in the lower portion of the screen. If

there is no video signal at the Video IN port of the CCTV TesterPRO, the type of NTSC or

PAL , and Video Level will not be displayed.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 30 31

Sin comentarios

CCTV Tester Pro Manual de usuario Pagina 16